Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Clopay Garage Door Installation in Bee Cave: What to Know First
Clopay garage door installation in Bee Cave typically runs $700 to $2,200 for a complete new door, depending on size, material, and insulation, and most jobs are scheduled within one to two weeks of the free measure. We’re an independent Clopay service provider, not a dealer, which means we can install any Clopay door you buy, fix what you already have, and tell you honestly when a repair beats a replacement. If you own a Clopay door or are thinking about one, call (737) 221-2436 and we’ll give you a straight answer before you spend a nickel.
This page is for Bee Cave homeowners who own a Clopay door and need honest installation work done right, quoted upfront, and guaranteed in writing. That’s what we’ve done since 2004.
How Clopay Products Fail - and How We Fix Them
A door is 200 pounds riding on two springs. Respect it. And Clopay doors, like every brand, have their own quirks. Here’s what we actually see on Clopay job sites around Bee Cave:
- Gallery Series steel doors and the rust creep along the bottom panel. The Gallery line is the most common Clopay door in Bee Cave, and the steel bottom panels take a beating from Hill Country rain splash-back. The powder coat eventually gives way at the edges. We see this every spring after the wet months. The fix is usually a panel replacement, not a full door replacement, and we’ll tell you which one makes sense before we touch anything.
- Coachman Series carriage-house doors and the crown-top section warping. The Coachman’s decorative overlay looks sharp, but heat does a number on the top section in west-facing garages. We’ve replaced crown tops on Coachman doors in Falconhead where afternoon sun baked one side for a decade. It’s a known weak point, and we fix it with a matched section instead of telling you to buy a whole new door.
- Weather seal failures on Clopay’s aluminum frame doors. The bottom seal on Clopay doors is a T-shaped rubber strip that shrinks in the heat and lets water, bugs, and dirt in. Same thing happens on the side seals. It’s a ten-minute fix most places, but it’s also the part homeowners ignore until the garage floods or the mice move in. We’ll check every seal on every job, whether you asked or not.
- Quiet-rated hinges and rollers wearing unevenly on insulated doors. Clopay puts nylon rollers on their better doors, and nylon wears smooth but then starts to wobble. Since Bee Cave driveways slope, one side of the door often bears more weight. We swap rollers before they chew up the tracks, and we always use OEM-match Clopay parts when we do. Aftermarket rollers are cheaper, but the nylon sleeves separate from the ball bearings on the no-name brands and then you’re back in the same spot six months later calling us anyway.
- Pinch-resistant panels that still pinch because the sections misalign. Clopay’s pinch-resistant designs are good, but only if the panels stay true. A door that’s been hit by a car, or that got racked by a broken cable, will have sections shifted half an inch. Then the pinch resistance means nothing. We’ll realign, rehang, and set the track right before anyone in your family puts a hand near that joint.
Our Clopay Garage Door Installation Process
When you call (737) 221-2436, here’s what happens:
- 1
The call. A live person answers, day or night, often Otto Reinhardt himself. Tell us what the door is doing wrong, or what you want installed, and we’ll give you a price on the phone and hold it when we get to your driveway. No dispatch, no third party, no call center.
- 2
The measure. We come out, measure the opening, check the headroom and side room, and look at your current track, springs, and opener. For a new Clopay door, the free measure is part of the price.
- 3
The straight answer. If your door can be repaired for $300, we’ll say so. If it needs a new door, we’ll show you the numbers for steel, wood, and insulated Clopay options, and we’ll tell you which one fits a Bee Cave garage. Then we write it all down.
- 4
The work. Once you approve the written price, we schedule the install. We remove the old door, set the new Clopay panels, hang the tracks, balance the springs to the exact weight of the new door, and install the opener if you want one. We use Clopay hardware whenever it matters, and we’ll tell you when a quality aftermarket part does the same job for less.
- 5
The test. We run the door through ten full cycles, watch the balance, listen to the opener, and check every roller, hinge, and seal. If the opener is straining, the problem is almost never the opener. We fix the door first, then test again.
- 6
The paper. You get a written 90-Day Done Right Promise on every invoice. If it’s not done right, one call brings Otto back. No runaround.
What Clopay Garage Door Installation Costs in Bee Cave
Here are the numbers we quote in Bee Cave, delivered in plain language so you know what you’re getting into:
- New single-car Clopay steel door, installed: $700 to $1,400, depending on insulation and panel style.
- New double-car Clopay door, installed: $1,200 to $2,200 for steel; wood doors start higher because the material costs more and the sections weigh more.
- Custom Clopay door, installed: $1,800 to $2,200 and up. If you want a wood carriage-house look or a custom size, the price moves accordingly.
- Opener installation, Clopay-matched: $250 to $550, including setup and safety sensor alignment.
- Repairs on an existing Clopay door: Spring repair runs $180 to $340, cable repair $130 to $250, panel replacement $250 to $500, roller replacement $110 to $220, and track realignment $120 to $240.
What moves the price: door size, insulation rating (R-value), whether you choose steel or wood, the condition of your existing track and springs, and how much reinforcement the opening needs. The price we quote on the phone is the price you pay when the job’s done. We never revise it upward at the door, and we’ll put that in writing before we start.
Call (737) 221-2436 for a free estimate on any Clopay installation in Bee Cave. The measure is free, the quote is free, and the second opinion is free too.
Why Bee Cave Homeowners Call Otto’s Garage Door for Clopay Work
We’ve been in this county since 2004, and Otto is a palindrome: reads the same from either end, same as the door. The name on the van is the name on the invoice and the name on the license. We publish our address and license number so you can verify who’s coming before the truck arrives. We answer the phone around the clock, including nine at night when a spring lets go and your vehicle is sealed inside. We quote on the call and hold that number at the door. And every Clopay job comes with our 90-Day Done Right Promise in writing. One call brings Otto back, no customer-service queue, no “we’ll create a ticket.”
We work on Clopay doors every week, and we also service LiftMaster, Chamberlain, and Genie openers, plus Amarr, Wayne Dalton, Craftsman, and Raynor doors. That matters because a Clopay door is only as good as the opener lifting it and the springs balancing it. We’ll make sure all three work together.
FAQs
No, we are an independent Clopay service provider, not a factory-authorized dealer or installer. That means we’re not limited to one brand’s line sheet, and we don’t have to push Clopay if another door fits your budget better. It also means our warranty comes from us in writing, not from a manufacturer’s fine print.
We use genuine Clopay panels and hardware when the job requires a factory match, especially on Gallery and Coachman doors where the stamping and color codes are specific. For springs, rollers, cables, and seals, we’ll tell you when a quality aftermarket part does the same job for less money. We don’t cut corners on bearings or steel, because a door is 200 pounds riding on two springs and cheap parts fail early.
Most of the time, yes. If the panels are sound and the track isn’t twisted, we’ll repair the springs, cables, rollers, or seals and get another five to ten years out of the door. If the bottom sections are rusted through or the door took a hit and racked, we’ll show you the repair price and the replacement price side by side and let you decide. Tell me what it’s doing wrong and I’ll tell you what it actually needs.
Measure to install usually takes one to two weeks, depending on the Clopay model and whether it’s already in the local supply chain. Custom wood doors and odd sizes take longer. If you need the door sealed tonight because a panel is missing or a spring snapped, call (737) 221-2436 and we’ll get you secured the same day, then schedule the full installation right after.
No, and we mean that literally. We quote the job on the phone, and when Otto shows up he holds that number unless you add work or the scope changes. We never revise upward at the door. The written estimate is the price, and the 90-Day Done Right Promise rides on top of it.
Call (737) 221-2436 for a free estimate on Clopay garage door installation in Bee Cave. Live person, upfront pricing, and a written guarantee from someone whose truck is twenty minutes away.
Written by Otto Reinhardt, Owner, Otto’s Garage Door - Bee Cave, TX at Otto’s Garage Door, serving Bee Cave and nearby areas.






Before
After
Before
After
Before
After